AgitMIM range
Industrial agitators manufacturer
InoxMIM designs and manufactures industrial agitators, emulsifiers and mixers in stainless steel. Three families and 19 models for mixing, dissolving, keeping solids in suspension and emulsifying, designed with fluid simulation.
- 3 familiesVertical, side-entry and emulsifying
- 19 modelsEach with its own technical data sheet
- 2,000–15,000 LTanks for the VMD/VMR agitator
- 0.25–22 kWSide-entry agitator power ratings
- 20,000 cPMaximum viscosity (EMV/EMVT)
- < 10 µmParticle size (MICRO)
Prefer to speak to a technician? Call 972 58 20 40 or download the AGITMIM catalogue (PDF)
InoxMIM industrial agitators at a glance
- Spanish manufacturer of stainless steel industrial agitators, based in Porqueres (Girona), with more than 25 years of experience.
- Three families: vertical agitators, side-entry agitators and emulsifiers and mixers.
- From portable clamp-mounted agitators and agitators for IBC containers to equipment for 15,000-litre tanks and counter-rotating systems.
- For the food, wine, cosmetics, pharmaceutical and chemical industries and for water treatment.
- Each installation designed with fluid simulation (CFD) and made to measure.
Industrial agitator families
Choose the family according to where the equipment is mounted and what it has to do with the product.
8 models
Vertical agitators
Mounted on top of the tank: dissolving, dispersing, mixing viscous products and working under pressure or vacuum.
View vertical agitators →
4 models
Side-entry agitators
In the lower part of the tank: mixing and maintaining large volumes and preventing solids from settling.
View side-entry agitators →
7 models
Emulsifiers and mixers
Emulsifying, homogenising, micronising and incorporating powder into liquid without lumps.
View emulsifiers and mixers →
Which agitator do you need?
The family is chosen according to where the equipment is installed and the result you are looking for.
All agitation models
All 19 models in the range, grouped by family. Each link leads to its technical data sheet.
Agitation design with fluid simulation
Before manufacturing, our engineers study the process with computational fluid dynamics (CFD) software and parametric modelling. This predicts how the flow will behave in the tank and lets us choose the propeller type, its position and the power needed to achieve a homogeneous mix with the lowest consumption.
The result is equipment tailored to each product and each tank, including agitation applications under vacuum or pressure.
Agitation by sector
In addition to individual pieces of equipment, we design complete lines and plants for each industry.
Food industry
Sauces, dairy products and beverages: agitators and emulsifiers for a homogeneous mix of ingredients.
View solutions →
Cosmetics and pharmaceutical industry
Creams, lotions and gels: stable emulsions and agitation in IBC containers.
View solutions →
Why choose InoxMIM agitators
CFD design
Each installation is studied with fluid simulation to get the propeller, its position and the power right.
Stainless steel
Shaft and propeller in AISI 316 or 316L depending on the model, with industrial, food or sanitary finishes.
A solution for every tank
From IBC containers and small tanks up to 15,000 litres, with vertical, side or bottom mounting.
Emulsifying and mixing
Vertical, bottom-entry and inline emulsifiers, a microniser, and low-shear and powder-into-liquid mixers.
Made to measure
We adapt motors, flanges, shafts and propellers to your tank and your process.
Technical advice
We help you choose the equipment using the real data of your product and your tank.
Frequently asked questions about InoxMIM industrial agitators
What types of industrial agitators does InoxMIM manufacture?
Vertical agitators (direct-drive, portable, geared, for IBC and counter-rotating), side-entry agitators, vertical, bottom-entry and inline emulsifiers, a microniser, and turbine and powder-into-liquid mixers. There are 19 models in all, each with its own technical data sheet.
What is the difference between a vertical and a side-entry agitator?
The vertical agitator is mounted on top of the tank and is the most versatile: it dissolves, disperses and works with viscous products. The side-entry agitator is installed at an angle in the lower part of the tank and is very efficient at mixing and maintaining large volumes and preventing solids from settling.
When do you need an emulsifier instead of an agitator?
When you have to mix phases that do not mix on their own, such as water and oil, or reduce the droplet or particle size. An agitator moves and homogenises; a rotor-stator emulsifier applies high shear to create stable emulsions.
In which sectors are InoxMIM agitators used?
In the food industry (sauces, dairy products, beverages), in wineries, in cosmetics and pharmaceuticals (creams, lotions, gels), in chemicals and in water treatment.
How is an agitation system designed?
The starting point is the product (viscosity, density, solids), the tank and the result required. With this data, our engineers simulate the flow with CFD software and choose the type of agitator, the propeller, its position and the power.
Does InoxMIM offer custom agitators?
Yes. In addition to the catalogue models, we adapt motors, flanges, shaft lengths and propellers, and we design special agitation systems for each process.
Let us help you choose your industrial agitator
Tell us what product you are mixing, the tank volume, the viscosity and the temperature, and we will recommend the right equipment.