Project Description

LECOR/LMRE Lateral Agitators

<

Foodstuff/sanitary Side-Entry Agitators with Gear Moto

The LECOR and LMRE bottom side entry agitators are suitable for the maintenance and mixing of products stored in medium and large sized tanks. This equipment is installed at the bottom of the tank at a tilted angle and with a distance from the bottom of the tank determined by the shape and dimensions of the tank.

The LECOR and LMRE models have sealing systems in the axis.  On the inside, where the axis is in contact with the product, there is a mechanical lock installed, and on the outside a safety packing can be incorporated.

The design and selection of the type of impeller depends on the type of product, the agitation requirements, the geometry of the tank and the position of the agitator with the aim of obtaining the maximum performance with minimal operation costs.

Its applications are varied and are used in different sectors of the industry in general.  For example, they are used in:

  • Heat exchanges
  • Chemical reactions
  • Dissolutions
  • Dilutions
  • Mixing reagents
  • Homogenisation of products (oils, sludge, slurries, waste water, urea, etc.)
  • Maintenance of products/suspensions (ammonium sulphate, adhesives, melamine, latex, resins, etc.)


Dimensions:



LECOR Agitador lateral con motorreductor

LECOR/LMRE Lateral Agitators

Foodstuff/sanitary Side-Entry Agitators with Gear Moto

The LECOR and LMRE bottom side entry agitators are suitable for the maintenance and mixing of products stored in medium and large sized tanks. This equipment is installed at the bottom of the tank at a tilted angle and with a distance from the bottom of the tank determined by the shape and dimensions of the tank.

The LECOR and LMRE models have sealing systems in the axis.  On the inside, where the axis is in contact with the product, there is a mechanical lock installed, and on the outside a safety packing can be incorporated.

The design and selection of the type of impeller depends on the type of product, the agitation requirements, the geometry of the tank and the position of the agitator with the aim of obtaining the maximum performance with minimal operation costs.

Its applications are varied and are used in different sectors of the industry in general.  For example, they are used in:

  • Heat exchanges
  • Chemical reactions
  • Dissolutions
  • Dilutions
  • Mixing reagents
  • Homogenisation of products (oils, sludge, slurries, waste water, urea, etc.)
  • Maintenance of products/suspensions (ammonium sulphate, adhesives, melamine, latex, resins, etc.)


Dimensions:



LECOR Agitador lateral con motorreductor
PUMPS
AGITATORS
BLOG